Alkalinity Control - 25L, Make:Vecom

CAN, VECOM

In stock

SKU

1601100021

ALKALINITY CONTROL is part of the VECOM MARINE fully coordinated treatment and should not be used in conjunction with a combined treatment. ALKALINITY CONTROL is added to the boiler water to maintain an optimum alkalinity level to prevent corrosion. Under these conditions, calcium and magnesium hardness salts cannot form and the precipitate can be removed by blowdown

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Directions for use - For optimum results, ALKALINITY CONTROL should be dosed directly into the boiler via a VECOM MARINE by-pass pot feeder, installed in the boiler feed line

Initial dosage - Initial dosage for untreated water is 200 ml of ALKALINITY CONTROL per ton of water. Dosages should be adjusted in accordance with the recommended P- & M-alkalinity level

Control Limits -

P-alkalinity: 100 to 150 ppm for boilers 0 – 30 bar
P-alkalinity: 100 to 120 ppm for boilers 30 – 60 bar
M-alkalinity: Less than two times P-alkalinity

Analysis is carried out using VECOM MARINE boiler water test kits.