Condensate Control - 25L, Make:Vecom
Steam & condensate conditione
CONDENSATE CONTROL is a liquid product containing neutralising amines readily miscible in water. It is used for prevention against corrosion in low- and high-pressure boiler steam and condensate systems
Applicatioin - CONDENSATE CONTROL is injected into the condensate pump discharge frequently to prevent corrosion in the steam and condensate lines. It can also be used to protect idle boilers from corrosion
Direction for use -The regular dosage of CONDENSATE CONTROL depends largely on the amount of carbon dioxide that has dissolved into the condensate. CONDENSATE CONTROL should be injected into the condensate line frequently to maintain a pH between 8.3 – 9. A typical dosage for a 10 ton system would require 0.25 l per day. Increase or decrease the dosage with 25% if the daily dosage does not result in the required pH value.
CONDENSATE CONTROL may be added into the feedwater. However, it must be injected into the feed line and not into the cascade tank. This is to ensure that the product does not volatilise before entering the boiler.
SKU | 1601100024 |
---|---|
Brand | Vecom |
-
Icon
SHIP ANYWHERE
Land or Water
-
Icon
Support 24/7
24/7 hours/day
-
Icon
BEST QUALITY
Guarantee
-
Icon
payment method
Secure payment