Boiler Treat One Shot - 25L, Make:Vecom
Vecom Marine offers various effective products for water treatment. These include products for conditioning cooling water and boiler water, preventing scale formation and corrosion, neutralising pH, etc. We have a full range of test kits for determination of alkalinity, chloride, nitrite, DEHA, phosphate and hardness.
Applications - BOILER TREAT ONE SHOT is suitable for use with all auxiliary boilers including waste heat and exhaust gas boilers. BOILER TREAT ONE SHOT prevents scale formation
Direction for use- or optimum results, BOILER TREAT ONE SHOT should be dosed directly into the boiler via a by-pass pot feeder installed in the boiler feed line. For low-pressure boilers without by-pass feeder, the product may be dosed into the hot well. But we do not advise this as a long term solution. Regular blowdown is necessary to remove sludge and solids.
In order to treat the boiler correctly, five elements are needed.
Alkaline controller and corrosion inhibitor – ALKALINITY CONTROL
Scale suppression and prevention – HARDNESS CONTROL LIQUID
Particle removal – LIQUID COAGULANT
Oxygen scavenging – HYDRAZIDE
Condensate conditioning or neutralising – CONDENSATE TREAT
BOILER TREAT ONE SHOT has two elements of treatment:
Alkaline controller and corrosion inhibitor
Scale suppression and prevention
Initial dosage
Initial dose for untreated system is 1 l of BOILER TREAT ONE SHOT per 1000 l of water. Maintenance dosages are determined by the result of P-alkalinity. Analysis is carried out using VECOM MARINE boiler water test kits.
NOTE: The phosphate and alkalinity values if analysed, may not necessarily correspond to the control levels. In cases of poor quality feedwater used, increased dosages may be required. If the P-alkalinity is persistently low, use ALKALINITY CONTROL to adjust. The pH of the boiler water should be kept between 9.5 – 11.
The boiler water parameters should be as per the boiler operating manual. Our recommendations are:
P-alkalinity: 100 – 200 ppm CaCO3 (ideal level P-alkalinity is 150 ppm)
M-alkalinity: Below two times P-alkalinity
Boiler chloride: Max. 90 ppm
Boiler pH: 9.5 – 11.0
Condensate pH: 8 – 10
Oxygen scavenger: 0.8 – 1.5 ppm
| SKU | 1601100023 |
|---|---|
| Brand | Vecom |
