Lubricant Threebond 1801B, Spray 180Ml, Make:ThreeBond, IMPA Code:450705

Applications · For rotating shafts, bearings, bolts, press fitted bearings, gears, drive fitted pins, etc. Directions for use · Usable to temperatures of -20°C - +60°C. · In using as screw-loosener, spray and wait for 2 - 3 minutes before dismantling. In the case of hard seizure, allow more time after application and knock several times with a hammer to facilitate dismantling. · To prevent rust replace moisture, spray from corner to corner. Repeated applications are recommended for use in the open air or near the sea. · To remove rust, spray onto the rusted parts and then wipe off with waste. Repeat this several times for stubborn rust. · Spraying on plugs, distributors, generators, ignition terminals and other electric parts can easily start engines. Handling Precautions 1. Super Lubricant contains high pressured flammable liquid, hence it is important to note the following: ñ Use completely before disposing ñ Do not use near flame sources ñ Store away from direct sunlight, and below 40°C. 2. Super Lubricant does not affect health adversely. (After LPG evaporated), however, note the following ñ Contact with skin: Does not irritate skin. Wipe off with cloth or paper and wash with soap and running water. ñ Contact with eyes: Wash under running water for 15 minutes and get medical help immediately. ñ Inhalation: Move victim to area with fresh air. Seek medical help if necessary. ñ Ingestion: It is generally harmless, but in case of uncomfortable feeling, obtains medical help if necessary. 3. Keep away from children. 4. Point nozzle away from other people before spraying. 5. When the can is inverted, only gas is ejected when the nozzle is pressed. 6. LPG is used. Hence if using the product in an enclosed area ensures that mechanical ventilation is available.